logo
Good price  online

products details

Home > Products >
AC EV Charger
>
OCPP1.6J Ready Dual Gun 44kW Commercial AC EV Charger 4.3 Inch Screen IP54 -25C to 55C

OCPP1.6J Ready Dual Gun 44kW Commercial AC EV Charger 4.3 Inch Screen IP54 -25C to 55C

Brand Name: Mckee Charging Cube
Model Number: AC-FS44-D2
MOQ: 1 Set
Price: Negotiate
Packaging Details: Plywood reinforced carton with foam padding, pedestal packed separately, one set per package
Payment Terms: T/T,L/C,D/A,D/P
Detail Information
Place of Origin:
Luoyang, Henan, China
Certification:
CE, RoHS, FCC
Product Type:
Floor Standing AC EV Charger
Rated Power:
22kW / 44kW Optional
Input Voltage:
400V AC +/- 10%, Three Phase
Output Current:
32A Per Gun
Connector Type:
IEC 62196 Type 2
Gun Configuration:
Dual Gun
Installation:
Floor Standing Pedestal, Wall Box Version Available
Display:
4.3 Inch High Brightness Color Touchscreen
Connectivity:
Bluetooth, 4G, Ethernet, WiFi With Mobile APP
Communication Protocol:
OCPP 1.6J
Start Modes:
QR Code, RFID Card, VIN Code
RCD Protection:
Type A Plus DC 6mA
Ingress Protection:
IP54 Body, IP65 Ingress
Safety Protection:
Short Circuit, Over Temperature, Over Current, Earth Leakage, Over Voltage, Under Voltage
Operating Temperature:
-25 C To +55 C
Application:
Highway Service Area, Public Parking, Commercial Building, Service Station, Enterprise Fleet
Supply Ability:
1500 Sets per Month
Highlight:

44kW dual gun AC EV charger

,

OCPP1.6J commercial AC EV charger

,

IP54 4.3 inch screen EV charger

Product Description
44kW Floor Standing Dual Gun AC EV Charger - OCPP1.6J
Commercial AC Charging | Dual Gun | IEC 62196 Type 2

A commercial AC charging pedestal rated 22kW or 44kW with two Type 2 guns, built for public car parks and service areas. The floor standing design keeps cable management tidy, while the optional wall box version fits space limited sites with a 320 x 210 x 100 mm enclosure.

Key Selling Points
  • Multi power platform - 7kW / 11kW / 14kW / 22kW / 44kW options, single gun or dual gun versions to match site load.
  • Two installation forms - floor standing pedestal and compact wall box share the same control platform.
  • Multi channel connectivity - Bluetooth, 4G, Ethernet and WiFi plus mobile APP for remote start and status monitoring.
  • OCPP 1.6J protocol - integrates with mainstream charging operators for billing and maintenance.
  • Three start modes - QR code, RFID card and VIN code activation, simple for any public user.
  • 4.3 inch high brightness screen - clear under strong outdoor light, intuitive operation flow.
  • Type A plus DC 6mA RCD - leakage protection with IP54 body and IP65 ingress rating.
  • Full chain safety - short circuit, over temperature, over current, earth leakage, over voltage and under voltage protection.
  • Wide operating range - -25 C to +55 C for cold and hot climate deployment.
  • CE, RoHS, FCC certified - ready for European and North American projects.
Power Configurations at a Glance
Rated Power Input Supply Output Current Typical Site
22kW total 400V AC, three phase 2 x 16A Workplace and hotel parking with moderate turnover
44kW total 400V AC, three phase 2 x 32A Public car park, service area, fleet depot
44kW with load sharing 400V AC, three phase, dynamic 2 x 32A shared Site with limited transformer capacity
How a Charging Session Runs
The driver plugs one of the two IEC 62196 Type 2 guns into the vehicle inlet.
The driver starts the session by scanning the QR code, tapping an RFID card or entering the VIN code.
The controller checks the dedicated Type A plus DC 6mA RCD for that gun and closes the contactor.
Power, energy and elapsed time appear on the 4.3 inch high brightness screen next to the active gun.
Session data is uploaded to the operator backend over OCPP 1.6J and the gun is released when the vehicle stops drawing current.

OCPP1.6J Ready Dual Gun 44kW Commercial AC EV Charger 4.3 Inch Screen IP54 -25C to 55C

OCPP1.6J Ready Dual Gun 44kW Commercial AC EV Charger 4.3 Inch Screen IP54 -25C to 55C

OCPP1.6J Ready Dual Gun 44kW Commercial AC EV Charger 4.3 Inch Screen IP54 -25C to 55C

Technical Specification
Item Specification
Rated Power 22kW / 44kW (dual gun)
Input Voltage 400V AC ± 10%, three phase
Output Current 32A per gun
Connector IEC 62196 Type 2, dual gun
Display 4.3 inch high brightness color touchscreen
Connectivity Bluetooth / 4G / Ethernet / WiFi + APP
Protocol OCPP 1.6J
RCD Type A + DC 6mA
Protection IP54 body, IP65 ingress
Operating Temperature -25°C to +55°C
Certification CE, RoHS, FCC
Extended Technical Data
Parameter Detail
Housing Material Galvanised steel pedestal with powder coated finish and flame retardant PC front panel
Pedestal Size 320 x 210 x 1450 mm, control head 320 x 210 x 100 mm
Net Weight Approx. 26 kg including pedestal
Charging Cable 5 m per gun standard, 7.5 m optional
Cable Management Integrated hanger and strain relief on both sides of the pedestal
Standby Consumption Below 5 W
Metering Class B energy meter per gun, 1 percent accuracy
Protection Devices Type A plus DC 6mA RCD per gun, miniature circuit breaker, surge protection device
Local Interface 4.3 inch color touchscreen, LED status strip, buzzer
RFID Reader 13.56 MHz, ISO 14443A/B
Network 4G LTE Cat 1, Ethernet RJ45, WiFi 802.11 b/g/n, Bluetooth 4.2
Firmware Update Remote over the air through the operator backend
Mounting Concrete foundation with anchor bolts, bottom cable entry and lockable service door
Connectivity and Backend Management

Two guns on one controller means one network node, one SIM card and one backend record for a dual bay installation, which lowers both hardware and operating cost per connector.

OCPP 1.6J with smart charging profiles controls each gun independently on the same connection.
Dynamic load sharing splits available site power between the two guns and releases capacity when one session ends.
4G, Ethernet, WiFi and Bluetooth give the operator a free choice of backhaul at each site.
The mobile APP shows live status for both guns so drivers can see which bay is free before arriving.
Offline mode keeps RFID authorisation and session storage local when the network drops.
Safety and Protection Architecture
An independent Type A plus DC 6mA RCD per gun isolates a fault to a single connector.
Earth leakage, over current, over voltage, under voltage, over temperature and short circuit protection act on both outputs.
A surge protection device at the incoming supply protects outdoor pedestal installations.
Gun lock feedback and cable detection prevent energising a damaged or unplugged cable.
IP54 body with IP65 ingress protection on the connector interface supports year round outdoor use.
Anti tamper fixings and a lockable service door protect the wiring compartment.
Installation and Site Planning
The pedestal is fixed on a concrete foundation with four anchor bolts and bottom cable entry.
A standard layout needs about one square metre of forecourt per pedestal with 1.2 m service clearance.
Two guns per pedestal halve the number of foundations, columns and network nodes on a site.
The same control head can be ordered as a wall box where floor space is not available.
Load management parameters are set on site from the local menu or remotely from the backend.
Certification and Compliance
CE marking for the European Union low voltage and electromagnetic compatibility directives.
RoHS compliance for restricted substances in electrical and electronic equipment.
FCC part 15 compliance for the North American market.
One test report covers both guns, which simplifies project documentation and customs clearance.
IEC 62196 Type 2 connector interface and IEC 61851 charging modes are followed.
Application

Designed for highway service areas, public parking lots, commercial buildings, service stations and enterprise fleets. Network protocol, branding and power configuration can be tailored to your charging network project.

Highway service areas and rest stops with high turnover and dual bay demand.
Public car parks and shopping centres running pay per session billing.
Commercial buildings, hotels and office parks serving staff and visitors.
Service stations converting fuel forecourts into charging hubs.
Enterprise and logistics fleets using depot charging with VIN based authorisation.
Packing, Delivery and After-Sales Support
Plywood reinforced carton with foam padding, pedestal packed separately, one set per package.
Ten working days for stock orders and twenty five to thirty five days for bulk production.
Two year warranty on the controller and power stage with five year spare part availability.
Remote firmware support plus a commissioning checklist for multi site rollouts.
Frequently Asked Questions
Can one pedestal charge two vehicles at full power at the same time? Yes when the site supply allows 44kW in total. With load sharing enabled the controller splits the available power dynamically.
How is the pedestal fixed to the ground? On a concrete foundation with four anchor bolts, with all cabling entering from the bottom of the pedestal.
Can a wall box head be fitted instead of the pedestal? Yes. The control head is identical, so one site can mix pedestals and wall boxes on a single backend.
What happens during a network outage? RFID authorisation and session storage continue locally, and all records are uploaded once the link is restored.

Share your bay layout, the available supply capacity and your target market, and we will return a pedestal layout drawing, configuration list and export quotation within two working days.

Model reference and customisation options are confirmed in the project quotation. Specifications may be adjusted for site conditions and destination market requirements.

OCPP1.6J Ready Dual Gun 44kW Commercial AC EV Charger 4.3 Inch Screen IP54 -25C to 55C