60kW DC EV Charger 10 inch Touch Screen RFID OCPP 1.6J IP54 for Public Parking Lot

60kW DC Fast Charger with 10 inch Touch Screen and OCPP 1.6J

The 60kW DC fast charger is the entry model of our DC charging range, sized for retail car parks, office buildings and public parking lots where the grid capacity is limited but drivers still expect a fast top-up. One charging session adds roughly 200km of range to a typical 60kWh passenger EV in about half an hour.

The cabinet uses modular power units with air cooling, so a single module fault never stops the whole station. Charging start is flexible: RFID card, mobile APP, QR code, VIN recognition or remote instruction from the CMS platform, which means the same hardware serves fleet operators, public operators and shopping mall owners without change.

Key Selling Points

• 60kW rated DC output, upgradeable across the 60kW / 120kW / 160kW / 240kW range and up to 180kW / 320kW / 360kW / 480kW versions for larger sites.
• CCS1, CCS2, CHAdeMO and GB/T connectors cover the majority of electric vehicles in Europe, North America, Japan and China.
• Five start modes: RFID card, mobile APP, CMS backend, QR code scanning and VIN recognition.
• OCPP 1.6J protocol with LAN, WiFi and 4G connectivity for fast integration with charging management platforms.
• 10 inch high brightness colour touch screen with a clear interface and simple operation flow.
• Air cooled modular power units keep runtime stable and reduce later maintenance cost.
• Wide operating range from -40C to +60C, stable in both cold and hot regions.
• IP54 protection grade for long term outdoor commercial installation.
• Multi layer safety protection against short circuit, over temperature, over current, leakage, over voltage and under voltage.
• Power factor up to 0.99, three phase AC380V (+/-15%) wide input, DC 200V-1000V output covering mainstream EV voltage platforms.
• 5m charging cable supplied as standard, with balanced multi gun output.
• TUV, CE and FCC certified, compliant for overseas export.
• OEM and ODM customisation available on power, connectors, housing and branding.

Technical Specifications

Applications

Suitable for public parking lots, retail car parks, office building garages, hotel and mall charging bays, and other commercial charging sites that need reliable DC fast charging.

Certification and Compliance

TUV, CE and FCC certified for export markets. Remote firmware upgrade and OCPP 1.6J compliance allow the charger to connect to most third party charging management platforms.

OEM and ODM Service

Power rating, connector mix, screen size, housing color, logo and language pack can be customised for your project. Send us the site layout and power capacity, and our engineering team will propose the module configuration and gun assignment.