| Brand Name: | Mckee Charging Cube |
| Model Number: | EC-PLG-HD150 |
| MOQ: | 10 Pieces |
| Price: | Negotiate |
| Packaging Details: | Individual PE bag with heavy-duty foam insert, double-wall export carton, palletised for LCL and FCL shipment |
| Payment Terms: | T/T,L/C,D/A,D/P |
Fleet depots, bus yards and logistics sites damage connectors in ways that public charging does not: vans reverse over dropped plugs, cables get dragged behind moving vehicles, and connectors sit outdoors through every season. This reinforced charging plug is built to IEC 62196-2:2010 SHEET 3-m with a housing designed around that abuse profile.
IP55 sealing blocks dust and water spray, so the contact chamber stays clean on open-air sites. The assembly operates from -30 C to +50 C, which covers unheated depots in northern Europe and sun-exposed yards in the south without the cable jacket stiffening to the point where drivers force the connector and damage the latch.
Insulation resistance of at least 2000 MOhm at DC 1000V and dielectric withstand of 3200V provide margin for high-voltage DC operation. Contact resistance peaks at 0.5 mOhm, keeping conduction losses and heat generation low, and terminal temperature rise is held under 50K so repeated daily charging cycles do not degrade the contact surfaces. Rated current reaches 150A at 1000V DC, and the connector is rated for more than 10000 no-load mating cycles.
| Parameter | Specification |
|---|---|
| Rated Current | 150A |
| Rated Voltage | 1000V DC |
| Application | Fleet yard, depot and outdoor DC charging |
| Standard | IEC 62196-2:2010 SHEET 3-m |
| Housing Material | Thermoplastic, UL94 V-0 flame retardant |
| Ingress Protection | IP55 dust and water resistant |
| Operating Temperature | -30 C to +50 C |
| Insertion / Extraction Force | Less than 100N |
| Mechanical Life | Over 10000 no-load mating cycles |
| Impact Resistance | 1 meter drop tested; withstands 2 ton vehicle roll-over |
| Insulation Resistance | 2000 MOhm minimum at DC 1000V |
| Dielectric Withstand | 3200V |
| Contact Resistance | 0.5 mOhm maximum |
| Terminal Temperature Rise | Below 50K |
Available with reinforced cable assemblies for depot installations. Send your site layout and vehicle mix, and we will recommend the connector and cable combination that fits.
![]()