60kW DC Charging Power Module Mckee-60 260-530Vac Input 1000-1500VDC Output High Power Charger Assembly

The 60kW unit sits in the middle of the family and is the rating most public charging cabinets are built around. It shares the same mechanical envelope and weight class as the 40kW, 50kW and 80kW units, so a single cabinet design covers a full product range.

Power versus cabinet cost. A 60kW module fills the gap between low power destination chargers and high power corridor equipment. It gives a single gun cabinet a charging rate that keeps a public bay turning over during daytime hours without the switchgear and cable cost of a high power build.

Same envelope, different rating. Because the 60kW unit uses the same 84mm x 300mm x 437.5mm footprint and the same 17.2kg weight as the rest of the family, an OEM can hold one rack design, one mounting kit and one service procedure across the whole product line.

Input flexibility. The 260Vac to 530Vac input range means the same module stock can be shipped to projects on different distribution voltages, which reduces the number of variants a distributor has to keep on the shelf.

The 84mm front width allows several modules to sit side by side in a cabinet rack, while the 300mm depth leaves room for DC busbar, control harness and airflow path behind the module face. The 437.5mm height keeps the rack compact enough for wall adjacent cabinets.

Installation. At 17.2kg the unit is light enough for one technician to seat into the rack. Mounting points and cable entry are arranged so the module can be withdrawn forward for service without moving the cabinet off its foundation.

Assembly line supply. Consistent dimensions and weight simplify jigs, lifting aids and torque procedures on a charger assembly line, and reduce the number of part numbers the production planner has to manage.

• Mckee-40 at 40kW for compact and space limited cabinets
• Mckee-50 at 50kW for destination charging and retrofit projects
• Mckee-60 at 60kW for mainstream public fast charging cabinets
• Mckee-80 at 80kW for high power corridor and fleet charger builds
• Bulk supply for charger OEM assembly lines and distributor stock

• Public DC fast charging cabinets for parking and retail sites
• Municipal charging points with standard power requirements
• Fleet depot chargers with daytime turnaround demand
• OEM production lines building a range of DC charger models

Confirm the cabinet rack dimensions against the 84mm x 300mm x 437.5mm envelope, the DC busbar interface and the site input voltage before ordering. The module is supplied as a unit for OEM assembly or as a replacement part for installed cabinets.

What is the difference between the 60kW and 80kW units?

Only the rated power. Both use the same 84mm x 300mm x 437.5mm envelope and the same 17.2kg weight class.

Does the module cover 800V vehicle platforms?

The DC output window is 1000VDC to 1500VDC, which sits above the 800V class and is intended for high voltage DC charger architectures.

What input voltage is supported?

Three phase 260Vac to 530Vac, covering the common distribution voltages used in export projects.

Can I stock one spare for a mixed power site?

Yes. Because the envelope and weight are common, one module form factor serves the whole 40kW to 80kW range.

Send us your cabinet drawing, target power step and project market, and our engineering team will return a module configuration, quotation and delivery schedule within 24 hours.