60kW Advertising Screen Series Dual Gun DC EV Charger 55 Inch LCD 10 Inch Touch OCPP1.6J IP54

This 60kW advertising screen charger is aimed at low traffic public parking, retail forecourts and municipal sites where the charging fee alone rarely covers the land cost. The 55-inch LCD panel above the charging bay runs programme advertising for brands and local businesses, so the site earns from media exposure during every charging session, including the hours when no vehicle is plugged in.

Technical Specification

1. 55 Inch LCD Panel Turns Every Bay Into Media Space

The 55-inch advertising LCD plays programme advertising, brand campaigns and local business promotions under CMS scheduling. Advertising keeps running between charging sessions, so an idle bay still generates exposure, and operators can sell the position to nearby retail, restaurants and service businesses.

2. Charging Screen Kept Separate From Advertising Screen

Driver interaction is handled on a dedicated 10-inch high brightness touch screen, with 1000 nit readability for direct sunlight. Charging start, energy tracking and settlement stay independent of media playback, so an advertising loop, a firmware refresh or a full screen creative never interrupts a session.

3. Power Ladder From 60kW to 480kW

The platform scales across 60kW, 80kW, 120kW, 160kW, 180kW, 240kW, 320kW and 480kW ratings on the same cabinet architecture and the same CMS interface. A site can start with 60kW and raise capacity later without changing spare parts strategy, operator training or the back office integration.

4. 200V to 1000V Output Covers Old and New EV Platforms

The wide DC window serves 400V passenger cars, 800V high voltage models and light commercial vans on one unit. No voltage specific SKU is required, which simplifies spare unit pooling across a mixed regional fleet.

5. Four Connector Families On One Platform

CCS1, CCS2, CHAdeMO and GB/T guns share the same cabinet, rectifier stack and control board. Operators serving North American, European, Japanese and Chinese vehicles can standardise on one hardware platform and one parts inventory instead of four regional variants.

6. Dual Gun Equalised Power Sharing

When two vehicles are connected, the controller distributes available power between the two guns according to each vehicle request. Both bays stay usable during peak hours instead of one vehicle taking the full stack, which raises bay turnover and revenue per square metre.

7. QR, RFID, VIN and APP Activation

Four independent start paths cover consumer, fleet and membership models. VIN recognition suits corporate fleets that need automatic vehicle identification and exclusive billing rules, while QR and RFID keep unattended public sites simple for occasional drivers.

8. OCPP 1.6J Over Ethernet, Wi-Fi or 4G

Native OCPP 1.6J interoperability connects the charger to third party CMS platforms for remote start and stop, tariff and billing rules, session logs and diagnostics. Ethernet, Wi-Fi and 4G are all onboard, so a site can run wired backhaul where available and cellular elsewhere.

9. Air Cooling Without Coolant Leak Risk

The thermal design relies on air cooled power modules and an isolated airflow path. There is no pump, no coolant reservoir and no hose joint to leak, which cuts preventive maintenance visits, spare part cost and unplanned downtime at remote sites.

10. TUV, CE and FCC Certified

Certification documentation supports tender submission, customs clearance and local electrical inspection for European, North American and other regulated markets, shortening the path from purchase order to energised site.

11. -40°C to +60°C With IP54

The cabinet runs from arctic winter to desert summer and keeps dust and water spray out of the power compartment. Heating and derating logic protect the modules at both temperature extremes, so the unit stays serviceable in coastal, arid and northern deployments.

12. Five Metre Cable Per Gun

Each gun carries a 5-metre cable, enough to reach charging ports on the left, right or rear of the vehicle. Drivers spend less time repositioning, and the longer reach also covers vans and light trucks with rear mounted inlets.

13. OEM and ODM Customisation

Cabinet colour, logo printing, UI skin, language pack, advertising CMS workflow and charging logic can all be adapted to a network brand. Custom builds keep the same certification basis where the configuration stays within the approved envelope.

14. Six Layer Electrical Protection

Short circuit, over temperature, over current, earth leakage, over voltage and under voltage protection are supervised independently. The protection chain isolates faults at module level, protecting both the vehicle battery and the charging hardware.

15. Typical Deployments

Low traffic public parking and retail forecourts, retail forecourts, hotel and office parking, highway service zones and municipal depots. The advertising panel works hardest where dwell time or passing traffic is high, and the 60kW rating matches the local grid capacity without overbuilding the service connection.

About McKee

Mckee is a manufacturer focusing on electric car charging stations and related electric car accessories. Committed to sustainable development since 2011, we constantly aim to adopt clean and green technologies, striving to provide safe and green energy services through technological innovation. We provide complete electric vehicle charging solutions, from innovative energy storage technology to public DC fast charging stations, fast charging stations and portable charging stations for home use. Our infrastructure can meet every type of demand.